Lodi Valley News.com

Complete News World

The charger is in the socket or on the cell phone?  A lot of people are doing it wrong

The charger is in the socket or on the cell phone? A lot of people are doing it wrong

Many people do not know, but using mobile charger Incorrectly used, this can damage the device and increase the risk of explosion. After all, the effects include overheating, short circuiting, leakage, and loss of warranty.

See also: 3 hidden Gmail tricks that many people never dream of

For this reason, it is important to follow the instructions in the manual so that you do not have to deal with unpleasant surprises. In other words, don't ignore the factors that make maintenance-related expenses lose money at the end of the month.

4 rules to maintain the useful life of your cell phone charger

  • Start by plugging the charger into the socket

First, before connecting your cell phone to the charger, you should make sure that the socket is in good condition. In this case, you must ensure that the voltage is compatible and that there is no moisture. Then insert the plug, making sure it is secure and secure, avoiding adapters and extension cords.

  • Connect the smartphone to the auxiliary cable

Secondly, the USB needs to power the smartphone without any interference, which results in improved charging. However, lack of care when handling the material leads to corrosion of the coating. Since rubber is fragile, do not twist the cables and check if the battery symbol appears on the screen. This procedure extends the life of the device, while putting less stress on the system.

  • Unplug your cell phone before removing the cable

When you need to stop charging, it is recommended to unplug the device first. As mentioned earlier, do not tear or pull the end, as the copper wire tends to break. Another tip is to start recharging when the mark reaches about 15% to 20%, and not turn it off completely.

  • Don't forget to use only original chargers
See also  Will you be able to challenge this AI chat?

Finally, the fake shipper does not have the warranties of a product approved by regulatory bodies. For example, in Brazil it is necessary to obtain the Anatel (National Telecommunications Agency) seal. Therefore, responsible replacement is based on purchasing a tested product. Therefore, it is free of unknown ingredients that can generate fires.